{"id":4053,"date":"2016-05-15T22:12:28","date_gmt":"2016-05-15T21:12:28","guid":{"rendered":"http:\/\/www.kevinhouston.net\/blog\/?p=4053"},"modified":"2016-05-15T22:12:28","modified_gmt":"2016-05-15T21:12:28","slug":"common-mistakes-in-complex-analysis-revision-help","status":"publish","type":"post","link":"https:\/\/www.kevinhouston.net\/blog\/2016\/05\/common-mistakes-in-complex-analysis-revision-help\/","title":{"rendered":"Common Mistakes in Complex Analysis (Revision help)"},"content":{"rendered":"<p>My new book, Complex Analysis: An Introduction, is nearly finished. To help my students with revision I created a list of common mistakes and this forms a chapter in the book. As a lecturer with many years of experience of teaching the subject I have seen these mistakes appear again and again in examinations. I&#8217;m sure that, due to pressure, we&#8217;ve all written nonsense in an exam which under normal conditions we wouldn&#8217;t have. Nonetheless, many of these errors occur every year and I suspect something deeper is going on.<\/p>\n<p>What follows is not intended to be a criticism of my students, who, luckily for me, are generally hard-working and intelligent. Nor is it an attempt to mock or ridicule them. Instead the aim is to identify common mistakes so that they are not made in the future.<\/p>\n<p>And if this post seems negative in tone, the a later one is more positive as it delves into techniques that improve understanding.<\/p>\n<p><H2>Imaginary numbers cannot be compared<\/H2><br \/>\nThe first mistake is the probably the most common: the comparison of imaginary numbers. For example, students write <img src='https:\/\/s0.wp.com\/latex.php?latex=z+%3C+R+&#038;bg=T&#038;fg=000000&#038;s=0' alt='z &lt; R ' title='z &lt; R ' class='latex' \/> for <img src='https:\/\/s0.wp.com\/latex.php?latex=z&#038;bg=T&#038;fg=000000&#038;s=0' alt='z' title='z' class='latex' \/> a complex number. This cannot be right. If <img src='https:\/\/s0.wp.com\/latex.php?latex=z&#038;bg=T&#038;fg=000000&#038;s=0' alt='z' title='z' class='latex' \/> were <img src='https:\/\/s0.wp.com\/latex.php?latex=3%2B2i&#038;bg=T&#038;fg=000000&#038;s=0' alt='3+2i' title='3+2i' class='latex' \/> what does it mean for <img src='https:\/\/s0.wp.com\/latex.php?latex=3%2B2i&#038;bg=T&#038;fg=000000&#038;s=0' alt='3+2i' title='3+2i' class='latex' \/> to be less than <img src='https:\/\/s0.wp.com\/latex.php?latex=R&#038;bg=T&#038;fg=000000&#038;s=0' alt='R' title='R' class='latex' \/>? What is usually intended is the <em>modulus<\/em> of <img src='https:\/\/s0.wp.com\/latex.php?latex=z&#038;bg=T&#038;fg=000000&#038;s=0' alt='z' title='z' class='latex' \/>, i.e., <img src='https:\/\/s0.wp.com\/latex.php?latex=%7Cz%7C+%3C+R&#038;bg=T&#038;fg=000000&#038;s=0' alt='|z| &lt; R' title='|z| &lt; R' class='latex' \/>.<\/p>\n<p>The point is, unlike real numbers, we cannot order the complex numbers. For example, which is bigger <img src='https:\/\/s0.wp.com\/latex.php?latex=3%2B2i&#038;bg=T&#038;fg=000000&#038;s=0' alt='3+2i' title='3+2i' class='latex' \/> or <img src='https:\/\/s0.wp.com\/latex.php?latex=1%2B4i&#038;bg=T&#038;fg=000000&#038;s=0' alt='1+4i' title='1+4i' class='latex' \/>? This is difficult to decide! Since complex numbers can be identified with the plane ordering them is equivalent to ordering the points of the plane and clearly this can&#8217;t be done &#8212; at least not in any useful or meaningful way.<\/p>\n<p>One last point needs to be made. Although <img src='https:\/\/s0.wp.com\/latex.php?latex=z+%3C+3%2B2i&#038;bg=T&#038;fg=000000&#038;s=0' alt='z &lt; 3+2i' title='z &lt; 3+2i' class='latex' \/> is <em>incorrect<\/em>, note that expressions like <img src='https:\/\/s0.wp.com\/latex.php?latex=z+%3C4&#038;bg=T&#038;fg=000000&#038;s=0' alt='z &lt;4' title='z &lt;4' class='latex' \/> can be true if <img src='https:\/\/s0.wp.com\/latex.php?latex=z&#038;bg=T&#038;fg=000000&#038;s=0' alt='z' title='z' class='latex' \/> is a real number.<\/p>\n<p><H2>Not realizing <img src='https:\/\/s0.wp.com\/latex.php?latex=re%5E%7Bit%7D&#038;bg=T&#038;fg=000000&#038;s=0' alt='re^{it}' title='re^{it}' class='latex' \/> gives a circle<\/H2><br \/>\nThis may not count as a mistake but is such a common gap in student exam knowledge that it needs to be mentioned:<\/p>\n<blockquote><p>Too many students can&#8217;t sketch the image of <img src='https:\/\/s0.wp.com\/latex.php?latex=e%5E%7Bit%7D&#038;bg=T&#038;fg=000000&#038;s=0' alt='e^{it}' title='e^{it}' class='latex' \/> and\/or can&#8217;t write down a contour whose image is the circle. <\/p><\/blockquote>\n<p>Let&#8217;s reiterate the basics. The contour defined by <img src='https:\/\/s0.wp.com\/latex.php?latex=%5Cgamma+%28t%29%3Dre%5E%7Bit%7D&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\gamma (t)=re^{it}' title='\\gamma (t)=re^{it}' class='latex' \/> defines part of a circle of radius <img src='https:\/\/s0.wp.com\/latex.php?latex=r&#038;bg=T&#038;fg=000000&#038;s=0' alt='r' title='r' class='latex' \/>. A full circle can be given by <img src='https:\/\/s0.wp.com\/latex.php?latex=0%5Cleq+t+%5Cleq+2%5Cpi+&#038;bg=T&#038;fg=000000&#038;s=0' alt='0\\leq t \\leq 2\\pi ' title='0\\leq t \\leq 2\\pi ' class='latex' \/>. Furthermore, the circle can be centred at <img src='https:\/\/s0.wp.com\/latex.php?latex=w&#038;bg=T&#038;fg=000000&#038;s=0' alt='w' title='w' class='latex' \/> just by adding <img src='https:\/\/s0.wp.com\/latex.php?latex=w&#038;bg=T&#038;fg=000000&#038;s=0' alt='w' title='w' class='latex' \/>. <\/p>\n<p>That is, <img src='https:\/\/s0.wp.com\/latex.php?latex=%5Cgamma+%28t%29%3Dw%2Bre%5E%7Bit%7D&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\gamma (t)=w+re^{it}' title='\\gamma (t)=w+re^{it}' class='latex' \/> with <img src='https:\/\/s0.wp.com\/latex.php?latex=0%5Cleq+t+%5Cleq+2%5Cpi+&#038;bg=T&#038;fg=000000&#038;s=0' alt='0\\leq t \\leq 2\\pi ' title='0\\leq t \\leq 2\\pi ' class='latex' \/> produces a circle of radius <img src='https:\/\/s0.wp.com\/latex.php?latex=r&#038;bg=T&#038;fg=000000&#038;s=0' alt='r' title='r' class='latex' \/> based at <img src='https:\/\/s0.wp.com\/latex.php?latex=w&#038;bg=T&#038;fg=000000&#038;s=0' alt='w' title='w' class='latex' \/>.<\/p>\n<p>By taking the modulus, we can show that <img src='https:\/\/s0.wp.com\/latex.php?latex=%5Cgamma+%28t%29%3Dre%5E%7Bit%7D&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\gamma (t)=re^{it}' title='\\gamma (t)=re^{it}' class='latex' \/> really does give a circle:<br \/>\n<center><img src='https:\/\/s0.wp.com\/latex.php?latex=%5Cleft%7C+re%5E%7Bit%7D%5Cright%7C%3D+r+%5Cleft%7C+%5Ccos+t+%2Bi+%5Csin+t+%5Cright%7C+%3D+r%5Cleft%28+%5Csqrt%7B%5Ccos+%5E2+t+%2B+%5Csin+%5E2+t+%7D%5Cright%29+%3D+r%5Csqrt%7B1%7D%3Dr&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\left| re^{it}\\right|= r \\left| \\cos t +i \\sin t \\right| = r\\left( \\sqrt{\\cos ^2 t + \\sin ^2 t }\\right) = r\\sqrt{1}=r' title='\\left| re^{it}\\right|= r \\left| \\cos t +i \\sin t \\right| = r\\left( \\sqrt{\\cos ^2 t + \\sin ^2 t }\\right) = r\\sqrt{1}=r' class='latex' \/>.<\/center><br \/>\nThus, the points on the contour all have the same length, i.e., are the same distance from the origin. And, a circle is just all the points the same distance from a specified point. Therefore, the image of <img src='https:\/\/s0.wp.com\/latex.php?latex=re%5E%7Bit%7D&#038;bg=T&#038;fg=000000&#038;s=0' alt='re^{it}' title='re^{it}' class='latex' \/> gives a circle when <img src='https:\/\/s0.wp.com\/latex.php?latex=0%5Cleq+t+%5Cleq+2%5Cpi+&#038;bg=T&#038;fg=000000&#038;s=0' alt='0\\leq t \\leq 2\\pi ' title='0\\leq t \\leq 2\\pi ' class='latex' \/>.<\/p>\n<p><H2><img src='https:\/\/s0.wp.com\/latex.php?latex=%7Ce%5Ez%7C&#038;bg=T&#038;fg=000000&#038;s=0' alt='|e^z|' title='|e^z|' class='latex' \/> is not equal to <img src='https:\/\/s0.wp.com\/latex.php?latex=e%5E%7B%7Cz%7C%7D&#038;bg=T&#038;fg=000000&#038;s=0' alt='e^{|z|}' title='e^{|z|}' class='latex' \/><\/H2><br \/>\nTempting as it may be to believe, <img src='https:\/\/s0.wp.com\/latex.php?latex=%7Ce%5Ez%7C&#038;bg=T&#038;fg=000000&#038;s=0' alt='|e^z|' title='|e^z|' class='latex' \/> is <bf>not<\/bf> equal to <img src='https:\/\/s0.wp.com\/latex.php?latex=e%5E%7B%7Cz%7C%7D&#038;bg=T&#038;fg=000000&#038;s=0' alt='e^{|z|}' title='e^{|z|}' class='latex' \/>. These two expressions are related as we shall see. The correct equality is<\/p>\n<p><center><img src='https:\/\/s0.wp.com\/latex.php?latex=%7Ce%5Ez%7C%3De%5E%7B%5Ctext%7BRe%7D%28z%29%7D.&#038;bg=T&#038;fg=000000&#038;s=0' alt='|e^z|=e^{\\text{Re}(z)}.' title='|e^z|=e^{\\text{Re}(z)}.' class='latex' \/><\/center><\/p>\n<p>It is reasonable to know the derivation of this:<br \/>\n<center><img src='https:\/\/s0.wp.com\/latex.php?latex=%7Ce%5Ez%7C%3D%7Ce%5E%7Bx%2Biy%7D%7C%3D%7Ce%5Ex%7C%7Ce%5E%7Biy%7D%7C%3D%7Ce%5Ex%7C%5Ctimes+1+%3D+%7Ce%5Ex%7C%3De%5Ex%3De%5E%7B%5Ctext%7BRe%7D%28z%29%7D.&#038;bg=T&#038;fg=000000&#038;s=0' alt='|e^z|=|e^{x+iy}|=|e^x||e^{iy}|=|e^x|\\times 1 = |e^x|=e^x=e^{\\text{Re}(z)}.' title='|e^z|=|e^{x+iy}|=|e^x||e^{iy}|=|e^x|\\times 1 = |e^x|=e^x=e^{\\text{Re}(z)}.' class='latex' \/><\/center><br \/>\nWhat is the relation to <img src='https:\/\/s0.wp.com\/latex.php?latex=e%5E%7B%7Cz%7C%7D&#038;bg=T&#038;fg=000000&#038;s=0' alt='e^{|z|}' title='e^{|z|}' class='latex' \/>? It&#8217;s an inequality:<br \/>\n<center><br \/>\n<img src='https:\/\/s0.wp.com\/latex.php?latex=%7Ce%5Ez%7C%5Cleq+e%5E%7B%7Cz%7C%7D+.&#038;bg=T&#038;fg=000000&#038;s=0' alt='|e^z|\\leq e^{|z|} .' title='|e^z|\\leq e^{|z|} .' class='latex' \/><br \/>\n<\/center><br \/>\nThis follows from the equality <img src='https:\/\/s0.wp.com\/latex.php?latex=%7Ce%5Ez%7C%3De%5E%7B%5Ctext%7BRe%7D%28z%29%7D&#038;bg=T&#038;fg=000000&#038;s=0' alt='|e^z|=e^{\\text{Re}(z)}' title='|e^z|=e^{\\text{Re}(z)}' class='latex' \/> since <img src='https:\/\/s0.wp.com\/latex.php?latex=%5Cexp+&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\exp ' title='\\exp ' class='latex' \/> is a strictly increasing function and <img src='https:\/\/s0.wp.com\/latex.php?latex=%5Ctext%7BRe%7D+%28z%29%5Cleq+%7Cz%7C&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\text{Re} (z)\\leq |z|' title='\\text{Re} (z)\\leq |z|' class='latex' \/>, as we can see by drawing an Argand diagram. This last part is just Pythagoras&#8217; Theorem in action!<\/p>\n<p><H2>Limits of the Standard Geometric Series<\/H2><\/p>\n<p>Some students have trouble remembering whether the lower limit of the standard geometric series<br \/>\n<center><img src='https:\/\/s0.wp.com\/latex.php?latex=%5Csum+x%5En+%3D++%5Cdfrac%7B1%7D%7B1-x%7D+&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\sum x^n =  \\dfrac{1}{1-x} ' title='\\sum x^n =  \\dfrac{1}{1-x} ' class='latex' \/><\/center><br \/>\nis <img src='https:\/\/s0.wp.com\/latex.php?latex=n%3D0&#038;bg=T&#038;fg=000000&#038;s=0' alt='n=0' title='n=0' class='latex' \/> or <img src='https:\/\/s0.wp.com\/latex.php?latex=n%3D1&#038;bg=T&#038;fg=000000&#038;s=0' alt='n=1' title='n=1' class='latex' \/>.<\/p>\n<p>Here is a situation in which taking a simple case provides the answer. We don&#8217;t need to look it up or provide a proof. Let <img src='https:\/\/s0.wp.com\/latex.php?latex=x%3D0&#038;bg=T&#038;fg=000000&#038;s=0' alt='x=0' title='x=0' class='latex' \/>, then we have<br \/>\n<center><img src='https:\/\/s0.wp.com\/latex.php?latex=%5Csum_%7Bn%3D0%7D%5E%5Cinfty+x%5En+%3D++1%2B+0%2B0%5E2%2B0%5E3%2B%5Cdots+%3D+%5Cdfrac%7B1%7D%7B1-0%7D+&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\sum_{n=0}^\\infty x^n =  1+ 0+0^2+0^3+\\dots = \\dfrac{1}{1-0} ' title='\\sum_{n=0}^\\infty x^n =  1+ 0+0^2+0^3+\\dots = \\dfrac{1}{1-0} ' class='latex' \/><\/center><br \/>\nand<br \/>\n<center><img src='https:\/\/s0.wp.com\/latex.php?latex=%5Csum_%7Bn%3D1%7D%5E%5Cinfty+x%5En+%3D++0%2B0%5E2%2B0%5E3%2B%5Cdots+%5Cneq++%5Cdfrac%7B1%7D%7B1-0%7D+&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\sum_{n=1}^\\infty x^n =  0+0^2+0^3+\\dots \\neq  \\dfrac{1}{1-0} ' title='\\sum_{n=1}^\\infty x^n =  0+0^2+0^3+\\dots \\neq  \\dfrac{1}{1-0} ' class='latex' \/><\/center><br \/>\nSo the lower limit is <img src='https:\/\/s0.wp.com\/latex.php?latex=n%3D0&#038;bg=T&#038;fg=000000&#038;s=0' alt='n=0' title='n=0' class='latex' \/>.<\/p>\n<p>This exemplifies a useful technique: when unsure of recalling a result try a special case.<\/p>\n<p><H2>Basic definitions<\/H2><br \/>\nIt is possible to write a whole chapter on definitions and the problems that arise. (In fact, I did. See my book <em>How to Think Like a Mathematician<\/em>.)<\/p>\n<p>Central definitions in complex analysis include differentiation and contour integral.  I regularly ask for the definition of complex differentiation and regularly most of the students fail to state it correctly. Quite often what I get is<br \/>\n<center><img src='https:\/\/s0.wp.com\/latex.php?latex=%5Clim_%7Bh%5Cto+0%7D+%5Cdfrac%7Bf%28z%2Bh%29-f%28z%29%7D%7Bh%7D.%5Cqquad+%5Cqquad+%28%2A%2A%29&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\lim_{h\\to 0} \\dfrac{f(z+h)-f(z)}{h}.\\qquad \\qquad (**)' title='\\lim_{h\\to 0} \\dfrac{f(z+h)-f(z)}{h}.\\qquad \\qquad (**)' class='latex' \/><\/center><br \/>\nAlternatives include <img src='https:\/\/s0.wp.com\/latex.php?latex=f%28z%29%5Cto+f%28a%29&#038;bg=T&#038;fg=000000&#038;s=0' alt='f(z)\\to f(a)' title='f(z)\\to f(a)' class='latex' \/> as <img src='https:\/\/s0.wp.com\/latex.php?latex=z%5Cto+a&#038;bg=T&#038;fg=000000&#038;s=0' alt='z\\to a' title='z\\to a' class='latex' \/> or some garbled version of the above, for example with modulus signs, <img src='https:\/\/s0.wp.com\/latex.php?latex=z%2Bh&#038;bg=T&#038;fg=000000&#038;s=0' alt='z+h' title='z+h' class='latex' \/> in the denominator and so on. <\/p>\n<p>So what is wrong with the expression in (**)? For a start there is no explanation of what <img src='https:\/\/s0.wp.com\/latex.php?latex=f&#038;bg=T&#038;fg=000000&#038;s=0' alt='f' title='f' class='latex' \/>, <img src='https:\/\/s0.wp.com\/latex.php?latex=z&#038;bg=T&#038;fg=000000&#038;s=0' alt='z' title='z' class='latex' \/> and <img src='https:\/\/s0.wp.com\/latex.php?latex=h&#038;bg=T&#038;fg=000000&#038;s=0' alt='h' title='h' class='latex' \/> are. It is important that <img src='https:\/\/s0.wp.com\/latex.php?latex=f&#038;bg=T&#038;fg=000000&#038;s=0' alt='f' title='f' class='latex' \/> is a complex function and that <img src='https:\/\/s0.wp.com\/latex.php?latex=z&#038;bg=T&#038;fg=000000&#038;s=0' alt='z' title='z' class='latex' \/> is identified as the point at which we are defining differentiability. Thus, we should say something like `The complex function <img src='https:\/\/s0.wp.com\/latex.php?latex=f&#038;bg=T&#038;fg=000000&#038;s=0' alt='f' title='f' class='latex' \/> is differentiable at <img src='https:\/\/s0.wp.com\/latex.php?latex=z&#038;bg=T&#038;fg=000000&#038;s=0' alt='z' title='z' class='latex' \/> if &#8230; &#8216;. Then we should bring in (**), making clear that we want this limit to exist, and to exist when <img src='https:\/\/s0.wp.com\/latex.php?latex=h%5Cin+%5Cmathbb%7BC%7D&#038;bg=T&#038;fg=000000&#038;s=0' alt='h\\in \\mathbb{C}' title='h\\in \\mathbb{C}' class='latex' \/> rather than <img src='https:\/\/s0.wp.com\/latex.php?latex=h%5Cin+%5Cmathbb%7BR%7D&#038;bg=T&#038;fg=000000&#038;s=0' alt='h\\in \\mathbb{R}' title='h\\in \\mathbb{R}' class='latex' \/>.<\/p>\n<p>Thus the definition should be something like<br \/>\n`The complex function <img src='https:\/\/s0.wp.com\/latex.php?latex=f&#038;bg=T&#038;fg=000000&#038;s=0' alt='f' title='f' class='latex' \/> is differentiable at <img src='https:\/\/s0.wp.com\/latex.php?latex=z&#038;bg=T&#038;fg=000000&#038;s=0' alt='z' title='z' class='latex' \/> if<br \/>\n<center><img src='https:\/\/s0.wp.com\/latex.php?latex=%5Clim_%7Bh%5Cto+0%7D+%5Cdfrac%7Bf%28z%2Bh%29-f%28z%29%7D%7Bh%7D+%2C+%5Cquad+h%5Cin+%5Cmathbb%7BC%7D+%2C&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\lim_{h\\to 0} \\dfrac{f(z+h)-f(z)}{h} , \\quad h\\in \\mathbb{C} ,' title='\\lim_{h\\to 0} \\dfrac{f(z+h)-f(z)}{h} , \\quad h\\in \\mathbb{C} ,' class='latex' \/><\/center><br \/>\nexists&#8217;.<\/p>\n<p>Similar problems occur for the definition of contour integration. That is, what <img src='https:\/\/s0.wp.com\/latex.php?latex=%5Cgamma+&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\gamma ' title='\\gamma ' class='latex' \/> and <img src='https:\/\/s0.wp.com\/latex.php?latex=f&#038;bg=T&#038;fg=000000&#038;s=0' alt='f' title='f' class='latex' \/> are in <img src='https:\/\/s0.wp.com\/latex.php?latex=%5Cint_%5Cgamma+f%28z%29+%5C%2C+dz+&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\int_\\gamma f(z) \\, dz ' title='\\int_\\gamma f(z) \\, dz ' class='latex' \/> is unexplained.<\/p>\n<p>This may seem pedantic. It is. Pedantry is very important in mathematics.<\/p>\n<h2>Confusing definitions with calculation processes<\/h2>\n<p>Do not confuse the <em>definition<\/em> of an object with a <em>process<\/em> by which we find that object.<\/p>\n<p>A good example of this mistake is confusing the definition of a pole with a process to find it. Poles and their multiplicities are clearly central to working with residues and so I regularly ask for the definitions in exams. <\/p>\n<p>In response to `Define what it means to be a pole at <img src='https:\/\/s0.wp.com\/latex.php?latex=w&#038;bg=T&#038;fg=000000&#038;s=0' alt='w' title='w' class='latex' \/> and define the order of a pole&#8217; I receive inaccurate (and often long and rambling) descriptions of how a pole is found in certain situations. For example, <\/p>\n<blockquote><p> `The order of the pole is the power of the thing when the pole is zero&#8217; or `the order of the pole is the order of the bracket&#8217;. (These get no marks.)<\/p><\/blockquote>\n<p> You can see in the former that the student does have some partial knowledge of pole order but that it is dependent on how pole order is calculated, i.e., we look for the zero (in the denominator) and find in most cases the power to which <img src='https:\/\/s0.wp.com\/latex.php?latex=%28z-w%29&#038;bg=T&#038;fg=000000&#038;s=0' alt='(z-w)' title='(z-w)' class='latex' \/> is taken. However, the question asked for the definition, so the precise definition should be given. <\/p>\n<p>As another example, consider the definition of a residue. Since the most useful method for calculating a residue is <img src='https:\/\/s0.wp.com\/latex.php?latex=%5Ctext%7Bres%7D+%28p%2Fq%2Cw%29%3Dp%28w%29%2Fq%27%28w%29&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\text{res} (p\/q,w)=p(w)\/q&#039;(w)' title='\\text{res} (p\/q,w)=p(w)\/q&#039;(w)' class='latex' \/> (ignoring conditions on <img src='https:\/\/s0.wp.com\/latex.php?latex=p&#038;bg=T&#038;fg=000000&#038;s=0' alt='p' title='p' class='latex' \/> and <img src='https:\/\/s0.wp.com\/latex.php?latex=q&#038;bg=T&#038;fg=000000&#038;s=0' alt='q' title='q' class='latex' \/> for the moment) I often receive this instead of a statement involving the coefficient of <img src='https:\/\/s0.wp.com\/latex.php?latex=%28z-w%29%5E%7B-1%7D&#038;bg=T&#038;fg=000000&#038;s=0' alt='(z-w)^{-1}' title='(z-w)^{-1}' class='latex' \/>. Again, the student is seeing `residue&#8217; as something that is calculated and gives a calculation method rather than seeing `residue&#8217; as a concept.<\/p>\n<h2>Misstating Theorems &#8211; Insufficient detail<\/h2>\n<p>Following on from the previous example, if I had asked students to state the <img src='https:\/\/s0.wp.com\/latex.php?latex=%5Ctext%7Bres%7D+%28p%2Fq%2Cw%29%3Dp%28w%29%2Fq%27%28w%29&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\text{res} (p\/q,w)=p(w)\/q&#039;(w)' title='\\text{res} (p\/q,w)=p(w)\/q&#039;(w)' class='latex' \/> formula, then the above answer, <img src='https:\/\/s0.wp.com\/latex.php?latex=%5Ctext%7Bres%7D+%28p%2Fq%2Cw%29%3Dp%28w%29%2Fq%27%28w%29&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\text{res} (p\/q,w)=p(w)\/q&#039;(w)' title='\\text{res} (p\/q,w)=p(w)\/q&#039;(w)' class='latex' \/> would be insufficient. There is no explanation of what <img src='https:\/\/s0.wp.com\/latex.php?latex=p&#038;bg=T&#038;fg=000000&#038;s=0' alt='p' title='p' class='latex' \/> and <img src='https:\/\/s0.wp.com\/latex.php?latex=q&#038;bg=T&#038;fg=000000&#038;s=0' alt='q' title='q' class='latex' \/> are and what conditions are placed on them. <\/p>\n<p>This is a common problem. When I ask students in my geometry class or during talks I give in schools what Pythagoras&#8217; Theorem is, I receive a prompt reply: <img src='https:\/\/s0.wp.com\/latex.php?latex=c%5E2%3Da%5E2%2Bb%5E2&#038;bg=T&#038;fg=000000&#038;s=0' alt='c^2=a^2+b^2' title='c^2=a^2+b^2' class='latex' \/>. I usually, to the initial confusion of the students, say no. There are two points, one is that <img src='https:\/\/s0.wp.com\/latex.php?latex=a&#038;bg=T&#038;fg=000000&#038;s=0' alt='a' title='a' class='latex' \/>, <img src='https:\/\/s0.wp.com\/latex.php?latex=b&#038;bg=T&#038;fg=000000&#038;s=0' alt='b' title='b' class='latex' \/> and <img src='https:\/\/s0.wp.com\/latex.php?latex=c&#038;bg=T&#038;fg=000000&#038;s=0' alt='c' title='c' class='latex' \/> are not defined. The second is deeper. The equation <img src='https:\/\/s0.wp.com\/latex.php?latex=c%5E2%3Da%5E2%2Bb%5E2&#038;bg=T&#038;fg=000000&#038;s=0' alt='c^2=a^2+b^2' title='c^2=a^2+b^2' class='latex' \/> is the <em>conclusion<\/em> of the theorem. The <em>assumptions<\/em> are missing. The most crucial of which of course is that we need a right-angled triangle. Students certainly know this detail but ignore its importance. <\/p>\n<p>Hence, for the above residue method we need to say `We have <img src='https:\/\/s0.wp.com\/latex.php?latex=%5Ctext%7Bres%7D+%28p%2Fq%2Cw%29%3Dp%28w%29%2Fq%27%28w%29&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\text{res} (p\/q,w)=p(w)\/q&#039;(w)' title='\\text{res} (p\/q,w)=p(w)\/q&#039;(w)' class='latex' \/> for <img src='https:\/\/s0.wp.com\/latex.php?latex=p&#038;bg=T&#038;fg=000000&#038;s=0' alt='p' title='p' class='latex' \/>, <img src='https:\/\/s0.wp.com\/latex.php?latex=q&#038;bg=T&#038;fg=000000&#038;s=0' alt='q' title='q' class='latex' \/> analytic with <img src='https:\/\/s0.wp.com\/latex.php?latex=p%28w%29%5Cneq+0+&#038;bg=T&#038;fg=000000&#038;s=0' alt='p(w)\\neq 0 ' title='p(w)\\neq 0 ' class='latex' \/>, <img src='https:\/\/s0.wp.com\/latex.php?latex=q%28w%29%3D0&#038;bg=T&#038;fg=000000&#038;s=0' alt='q(w)=0' title='q(w)=0' class='latex' \/>, <img src='https:\/\/s0.wp.com\/latex.php?latex=q%27%28w%29%5Cneq+0&#038;bg=T&#038;fg=000000&#038;s=0' alt='q&#039;(w)\\neq 0' title='q&#039;(w)\\neq 0' class='latex' \/>&#8216;.<\/p>\n<p>The most common problem in misstating theorems is to just state the conclusion, particularly if the conclusion is a formula. Hopefully, now you can see that Cauchy&#8217;s Integral Formula is not just<br \/>\n<center><img src='https:\/\/s0.wp.com\/latex.php?latex=%5Cint_%5Cgamma+%5Cdfrac%7Bf%28z%29%7D%7Bz-w%7D+%5C%2C+dz+%3D2%5Cpi+i%5C%2C+n%28%5Cgamma+%2Cw%29+f%28w%29.&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\int_\\gamma \\dfrac{f(z)}{z-w} \\, dz =2\\pi i\\, n(\\gamma ,w) f(w).' title='\\int_\\gamma \\dfrac{f(z)}{z-w} \\, dz =2\\pi i\\, n(\\gamma ,w) f(w).' class='latex' \/><\/center><\/p>\n<h2>Order of Poles<\/h2>\n<p>Another error with poles is to believe that the order of a pole is the order of the zero in the denominator of a rational function. That this is erroneous we can see with the function <img src='https:\/\/s0.wp.com\/latex.php?latex=%28e%5Ez-1%29%2Fz%5E3&#038;bg=T&#038;fg=000000&#038;s=0' alt='(e^z-1)\/z^3' title='(e^z-1)\/z^3' class='latex' \/> which has a zero of order 3 at 0 in the denominator but the order of the pole there is 2. In non-rigorous terms &#8212; and this really is non-rigorous &#8212; the numerator has a zero of order 1 and it `cancels&#8217; with one of the zeros in the denominator.<\/p>\n<p>We can&#8217;t even say that the order of the pole is at most the order of the zero in the denominator. For example, we can calculate that <img src='https:\/\/s0.wp.com\/latex.php?latex=%5Ccot+%28z%29%2Fz%5E2&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\cot (z)\/z^2' title='\\cot (z)\/z^2' class='latex' \/> has a pole of order 3 at 0, not a pole of order 2. In this case the non-rigorous explanation is that <img src='https:\/\/s0.wp.com\/latex.php?latex=%5Ccot+&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\cot ' title='\\cot ' class='latex' \/> has a pole of order 1 at 0 so combines with the pole of order 2 for <img src='https:\/\/s0.wp.com\/latex.php?latex=1%2Fz%5E2&#038;bg=T&#038;fg=000000&#038;s=0' alt='1\/z^2' title='1\/z^2' class='latex' \/> to give a pole of order 3. <\/p>\n<p>This partly arises from the non-uniqueness of  the representation of a function as a quotient. Here <img src='https:\/\/s0.wp.com\/latex.php?latex=%5Ccot+z&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\cot z' title='\\cot z' class='latex' \/> is <img src='https:\/\/s0.wp.com\/latex.php?latex=1%2F%5Ctan+z&#038;bg=T&#038;fg=000000&#038;s=0' alt='1\/\\tan z' title='1\/\\tan z' class='latex' \/> and so <img src='https:\/\/s0.wp.com\/latex.php?latex=%5Ccot+%28z%29%2Fz%5E2&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\cot (z)\/z^2' title='\\cot (z)\/z^2' class='latex' \/> can be written as <img src='https:\/\/s0.wp.com\/latex.php?latex=1%2F%28z%5E2%5Ctan%28z%29%29&#038;bg=T&#038;fg=000000&#038;s=0' alt='1\/(z^2\\tan(z))' title='1\/(z^2\\tan(z))' class='latex' \/>. The latter representation has a zero of order 3 in the denominator (since <img src='https:\/\/s0.wp.com\/latex.php?latex=%5Ctan+z&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\tan z' title='\\tan z' class='latex' \/> has a zero of order 1 at 0) and is non-zero in the numerator, hence we have a pole of order 3. The point, perhaps, is to not be fooled by the way a function is written as a quotient. <\/p>\n<h2>Integrals<\/h2>\n<p>Clearly, an integral of the form <img src='https:\/\/s0.wp.com\/latex.php?latex=%5Cint_%7B-%5Cinfty+%7D%5E%5Cinfty+f%28x%29%5C%2C+dx+&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\int_{-\\infty }^\\infty f(x)\\, dx ' title='\\int_{-\\infty }^\\infty f(x)\\, dx ' class='latex' \/>, where <img src='https:\/\/s0.wp.com\/latex.php?latex=f&#038;bg=T&#038;fg=000000&#038;s=0' alt='f' title='f' class='latex' \/> is a real function, must produce a real number. The methods in the book allow us to calculate such integrals with complex analysis and there is the danger that a minor miscalculation will produce an imaginary number. Hence, any working which produces an imaginary number is wrong and should be corrected.<\/p>\n<h2>The radius of convergence is real<\/h2>\n<p>The radius of convergence is real and <em>never<\/em> has an imaginary part.<\/p>\n<p>The ratio test is one of the best tests we have for convergence of series and it can be used to calculate the radius of convergence of power series.<br \/>\nIn most elementary analysis course where real series <img src='https:\/\/s0.wp.com\/latex.php?latex=%5Csum_%7Bn%3D0%7D%5E%5Cinfty++a_nz%5En&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\sum_{n=0}^\\infty  a_nz^n' title='\\sum_{n=0}^\\infty  a_nz^n' class='latex' \/> are studied it is common for the ratio test to be stated with <img src='https:\/\/s0.wp.com\/latex.php?latex=a_n%3E0&#038;bg=T&#038;fg=000000&#038;s=0' alt='a_n&gt;0' title='a_n&gt;0' class='latex' \/>. This leads to some students misapplying it in the complex case. Consider the series <img src='https:\/\/s0.wp.com\/latex.php?latex=%5Csum_%7Bn%3D0%7D%5E%5Cinfty++%283-4i%29%5Enz%5En&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\sum_{n=0}^\\infty  (3-4i)^nz^n' title='\\sum_{n=0}^\\infty  (3-4i)^nz^n' class='latex' \/> and let <img src='https:\/\/s0.wp.com\/latex.php?latex=a_n%3D%283-4i%29z%5En&#038;bg=T&#038;fg=000000&#038;s=0' alt='a_n=(3-4i)z^n' title='a_n=(3-4i)z^n' class='latex' \/>. Then,<br \/>\n<center><img src='https:\/\/s0.wp.com\/latex.php?latex=%5Cdfrac%7Ba_%7Bn%2B1%7D%7D%7Ba_n%7D+%3D+%5Cdfrac%7B%283-4i%29%5E%7Bn%2B1%7Dz%5E%7Bn%2B1%7D%7D%7B%283-4i%29%5Enz%5En%7D+%3D+%283-4i%29z+%5Cto+%283-4i%29z+%7B%5Ctext%7B+as+%7D%7D+n%5Cto+%5Cinfty.&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\dfrac{a_{n+1}}{a_n} = \\dfrac{(3-4i)^{n+1}z^{n+1}}{(3-4i)^nz^n} = (3-4i)z \\to (3-4i)z {\\text{ as }} n\\to \\infty.' title='\\dfrac{a_{n+1}}{a_n} = \\dfrac{(3-4i)^{n+1}z^{n+1}}{(3-4i)^nz^n} = (3-4i)z \\to (3-4i)z {\\text{ as }} n\\to \\infty.' class='latex' \/><\/center><br \/>\nSo far, so good. For this example, the common mistake is to write something like, `we require that <img src='https:\/\/s0.wp.com\/latex.php?latex=z+%3C+%5Cdfrac%7B1%7D%7B3-4i%7D&#038;bg=T&#038;fg=000000&#038;s=0' alt='z &lt; \\dfrac{1}{3-4i}' title='z &lt; \\dfrac{1}{3-4i}' class='latex' \/> and so the radius of convergence is <img src='https:\/\/s0.wp.com\/latex.php?latex=%5Cdfrac%7B1%7D%7B3-4i%7D&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\dfrac{1}{3-4i}' title='\\dfrac{1}{3-4i}' class='latex' \/>&#8216;.<br \/>\n(My guess is that students are slavishly following the procedure in the real case.)<br \/>\nThis cannot be right. What does a circle of radius <img src='https:\/\/s0.wp.com\/latex.php?latex=1%2F%283-4i%29&#038;bg=T&#038;fg=000000&#038;s=0' alt='1\/(3-4i)' title='1\/(3-4i)' class='latex' \/> look like? We need the radius to be real.<\/p>\n<p>To prevent this error we could define <img src='https:\/\/s0.wp.com\/latex.php?latex=a_n%3D%7C%283-4i%29z%5En%7C&#038;bg=T&#038;fg=000000&#038;s=0' alt='a_n=|(3-4i)z^n|' title='a_n=|(3-4i)z^n|' class='latex' \/> or, what amounts to the same thing, just write<br \/>\n<center><img src='https:\/\/s0.wp.com\/latex.php?latex=%5Cleft%7C+%5Cdfrac%7Ba_%7Bn%2B1%7D%7D%7Ba_n%7D+%5Cright%7C+%3D+%5Cleft%7C+%5Cdfrac%7B%283-4i%29%5E%7Bn%2B1%7Dz%5E%7Bn%2B1%7D%7D%7B%283-4i%29%5Enz%5En%7D+%5Cright%7C%3D+%5Cleft%7C+%283-4i%29%5Cright%7C+%5Cleft%7C+z+%5Cright%7C++%3D+5%7Cz%7C.&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\left| \\dfrac{a_{n+1}}{a_n} \\right| = \\left| \\dfrac{(3-4i)^{n+1}z^{n+1}}{(3-4i)^nz^n} \\right|= \\left| (3-4i)\\right| \\left| z \\right|  = 5|z|.' title='\\left| \\dfrac{a_{n+1}}{a_n} \\right| = \\left| \\dfrac{(3-4i)^{n+1}z^{n+1}}{(3-4i)^nz^n} \\right|= \\left| (3-4i)\\right| \\left| z \\right|  = 5|z|.' class='latex' \/><\/center><br \/>\nThus we require <img src='https:\/\/s0.wp.com\/latex.php?latex=5%7Cz%7C+%3C+1&#038;bg=T&#038;fg=000000&#038;s=0' alt='5|z| &lt; 1' title='5|z| &lt; 1' class='latex' \/>, i.e., <img src='https:\/\/s0.wp.com\/latex.php?latex=%7Cz%7C+%3C+1%2F5&#038;bg=T&#038;fg=000000&#038;s=0' alt='|z| &lt; 1\/5' title='|z| &lt; 1\/5' class='latex' \/>. In other words the radius of convergence is <img src='https:\/\/s0.wp.com\/latex.php?latex=1%2F5&#038;bg=T&#038;fg=000000&#038;s=0' alt='1\/5' title='1\/5' class='latex' \/>.<\/p>\n<h2>We cannot always replace <img src='https:\/\/s0.wp.com\/latex.php?latex=%5Ccos+z+&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\cos z ' title='\\cos z ' class='latex' \/> with <img src='https:\/\/s0.wp.com\/latex.php?latex=%28z%2Bz%5E%7B-1%7D%29%2F2&#038;bg=T&#038;fg=000000&#038;s=0' alt='(z+z^{-1})\/2' title='(z+z^{-1})\/2' class='latex' \/><\/h2>\n<p>I often see <img src='https:\/\/s0.wp.com\/latex.php?latex=%5Cdfrac%7Bz%2Bz%5E%7B-1%7D+%7D%7B2%7D+&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\dfrac{z+z^{-1} }{2} ' title='\\dfrac{z+z^{-1} }{2} ' class='latex' \/> substituted for <img src='https:\/\/s0.wp.com\/latex.php?latex=%5Ccos+z&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\cos z' title='\\cos z' class='latex' \/> (and a similar substitution for <img src='https:\/\/s0.wp.com\/latex.php?latex=%5Csin+z&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\sin z' title='\\sin z' class='latex' \/>)  However, these are not equal. The confusion here comes from dealing with integrals of the form <img src='https:\/\/s0.wp.com\/latex.php?latex=%5Cint_0%5E%7B2%5Cpi+%7D+f%28%5Ccos+%5Ctheta%2C+%5Csin+%5Ctheta+%29+%5C%2C+d%5Ctheta+&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\int_0^{2\\pi } f(\\cos \\theta, \\sin \\theta ) \\, d\\theta ' title='\\int_0^{2\\pi } f(\\cos \\theta, \\sin \\theta ) \\, d\\theta ' class='latex' \/> where <img src='https:\/\/s0.wp.com\/latex.php?latex=%5Cdfrac%7Bz%2Bz%5E%7B-1%7D+%7D%7B2%7D+&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\dfrac{z+z^{-1} }{2} ' title='\\dfrac{z+z^{-1} }{2} ' class='latex' \/> is legitimately substituted for <img src='https:\/\/s0.wp.com\/latex.php?latex=%5Ccos+%5Ctheta+&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\cos \\theta ' title='\\cos \\theta ' class='latex' \/>. The important differences are (i) <img src='https:\/\/s0.wp.com\/latex.php?latex=%5Ctheta+&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\theta ' title='\\theta ' class='latex' \/> is used, and (ii) it can only be used because <img src='https:\/\/s0.wp.com\/latex.php?latex=z%3De%5E%7Bi%5Ctheta+%7D&#038;bg=T&#038;fg=000000&#038;s=0' alt='z=e^{i\\theta }' title='z=e^{i\\theta }' class='latex' \/>. <\/p>\n<h2>Argument problems<\/h2>\n<p>The argument of a complex number causes a number of problems.<\/p>\n<p>First, for the argument <img src='https:\/\/s0.wp.com\/latex.php?latex=%5Ctheta+&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\theta ' title='\\theta ' class='latex' \/> of <img src='https:\/\/s0.wp.com\/latex.php?latex=x%2Biy&#038;bg=T&#038;fg=000000&#038;s=0' alt='x+iy' title='x+iy' class='latex' \/> with <img src='https:\/\/s0.wp.com\/latex.php?latex=x%5Cneq+0&#038;bg=T&#038;fg=000000&#038;s=0' alt='x\\neq 0' title='x\\neq 0' class='latex' \/> we have the equation <img src='https:\/\/s0.wp.com\/latex.php?latex=%5Ctan+%5Ctheta+%3Dy%2Fx&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\tan \\theta =y\/x' title='\\tan \\theta =y\/x' class='latex' \/>. This means many students calculate <img src='https:\/\/s0.wp.com\/latex.php?latex=%5Ctheta+&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\theta ' title='\\theta ' class='latex' \/> with <img src='https:\/\/s0.wp.com\/latex.php?latex=%5Carctan+%28y%2Fx%29&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\arctan (y\/x)' title='\\arctan (y\/x)' class='latex' \/> (sometimes also written, somewhat erroneously, as <img src='https:\/\/s0.wp.com\/latex.php?latex=%5Ctan+%5E%7B-1%7D%28y%2Fx%29&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\tan ^{-1}(y\/x)' title='\\tan ^{-1}(y\/x)' class='latex' \/>). We can see that this can lead to errors:<br \/>\n<center><img src='https:\/\/s0.wp.com\/latex.php?latex=%5Ctext%7BArg%7D+%281%2Bi%29+%3D+%5Cdfrac%7B%5Cpi+%7D%7B4%7D+%5Cquad+%7B%5Ctext%7B+and+%7D%7D+%5Cquad+%5Ctext%7BArg%7D+%28-1-i%29+%3D+-%5Cdfrac%7B3%5Cpi+%7D%7B4%7D&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\text{Arg} (1+i) = \\dfrac{\\pi }{4} \\quad {\\text{ and }} \\quad \\text{Arg} (-1-i) = -\\dfrac{3\\pi }{4}' title='\\text{Arg} (1+i) = \\dfrac{\\pi }{4} \\quad {\\text{ and }} \\quad \\text{Arg} (-1-i) = -\\dfrac{3\\pi }{4}' class='latex' \/><\/center><br \/>\nbut <img src='https:\/\/s0.wp.com\/latex.php?latex=%5Carctan+%281%2F1%29%3D%5Carctan+%281%29+%3D+%5Carctan+%28-1%2F-1%29+&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\arctan (1\/1)=\\arctan (1) = \\arctan (-1\/-1) ' title='\\arctan (1\/1)=\\arctan (1) = \\arctan (-1\/-1) ' class='latex' \/>.Further details can be found in the book. The important point is to take care with the cases <img src='https:\/\/s0.wp.com\/latex.php?latex=x+%3C+0&#038;bg=T&#038;fg=000000&#038;s=0' alt='x &lt; 0' title='x &lt; 0' class='latex' \/> and <img src='https:\/\/s0.wp.com\/latex.php?latex=x%3D0&#038;bg=T&#038;fg=000000&#038;s=0' alt='x=0' title='x=0' class='latex' \/>. Plotting on an Argand diagram often helps.<\/p>\n<p>A second mistake is in the use of polar notation: If <img src='https:\/\/s0.wp.com\/latex.php?latex=r_1e%5E%7Bi%5Ctheta+_1%7D+%3D+r_2e%5E%7Bi%5Ctheta+_2%7D+&#038;bg=T&#038;fg=000000&#038;s=0' alt='r_1e^{i\\theta _1} = r_2e^{i\\theta _2} ' title='r_1e^{i\\theta _1} = r_2e^{i\\theta _2} ' class='latex' \/>, then <img src='https:\/\/s0.wp.com\/latex.php?latex=r_1%3Dr_2&#038;bg=T&#038;fg=000000&#038;s=0' alt='r_1=r_2' title='r_1=r_2' class='latex' \/> and <img src='https:\/\/s0.wp.com\/latex.php?latex=%5Ctheta+_1%3D%5Ctheta+_2%2B2k%5Cpi+&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\theta _1=\\theta _2+2k\\pi ' title='\\theta _1=\\theta _2+2k\\pi ' class='latex' \/> for some <img src='https:\/\/s0.wp.com\/latex.php?latex=k%5Cin+%5Cmathbb%7BZ%7D&#038;bg=T&#038;fg=000000&#038;s=0' alt='k\\in \\mathbb{Z}' title='k\\in \\mathbb{Z}' class='latex' \/>.<br \/>\nThe mistake is to forget the extra <img src='https:\/\/s0.wp.com\/latex.php?latex=2k%5Cpi+&#038;bg=T&#038;fg=000000&#038;s=0' alt='2k\\pi ' title='2k\\pi ' class='latex' \/> (and sometimes students take <img src='https:\/\/s0.wp.com\/latex.php?latex=k%5Cin+%5Cmathbb%7BN%7D&#038;bg=T&#038;fg=000000&#038;s=0' alt='k\\in \\mathbb{N}' title='k\\in \\mathbb{N}' class='latex' \/> rather than <img src='https:\/\/s0.wp.com\/latex.php?latex=%5Cmathbb%7BZ%7D&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\mathbb{Z}' title='\\mathbb{Z}' class='latex' \/>).<\/p>\n<p>This leads to another common error as the previous remark has an important consequence for solving <img src='https:\/\/s0.wp.com\/latex.php?latex=e%5Ez%3Dw&#038;bg=T&#038;fg=000000&#038;s=0' alt='e^z=w' title='e^z=w' class='latex' \/>. We have <img src='https:\/\/s0.wp.com\/latex.php?latex=z%3D+%5Cln+%7Cw%7C+%2B+i+%5Carg%28w%29+%2B+2k%5Cpi+i+&#038;bg=T&#038;fg=000000&#038;s=0' alt='z= \\ln |w| + i \\arg(w) + 2k\\pi i ' title='z= \\ln |w| + i \\arg(w) + 2k\\pi i ' class='latex' \/>, for <img src='https:\/\/s0.wp.com\/latex.php?latex=k%5Cin+%5Cmathbb%7BZ%7D+&#038;bg=T&#038;fg=000000&#038;s=0' alt='k\\in \\mathbb{Z} ' title='k\\in \\mathbb{Z} ' class='latex' \/>. Too often the <img src='https:\/\/s0.wp.com\/latex.php?latex=2k%5Cpi+i&#038;bg=T&#038;fg=000000&#038;s=0' alt='2k\\pi i' title='2k\\pi i' class='latex' \/> term is forgotten.<\/p>\n<h2>Odds and ends<\/h2>\n<ul>\n<li> The modulus of a number is never complex. (This usually occurs due to erroneously taking <img src='https:\/\/s0.wp.com\/latex.php?latex=%7Cx%2Biy%7C%3D%5Csqrt%7Bx%5E2%2B%28iy%29%5E2%7D&#038;bg=T&#038;fg=000000&#038;s=0' alt='|x+iy|=\\sqrt{x^2+(iy)^2}' title='|x+iy|=\\sqrt{x^2+(iy)^2}' class='latex' \/>! This is a very, very common mistake. It leads to <img src='https:\/\/s0.wp.com\/latex.php?latex=%5Csqrt%7Bx%5E2-y%5E2%7D&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\sqrt{x^2-y^2}' title='\\sqrt{x^2-y^2}' class='latex' \/> which can in turn lead to an imaginary number. (An example is given in the book.)\n<li> <img src='https:\/\/s0.wp.com\/latex.php?latex=f%28a%2Bib%29&#038;bg=T&#038;fg=000000&#038;s=0' alt='f(a+ib)' title='f(a+ib)' class='latex' \/> is <b>not<\/b> equal to <img src='https:\/\/s0.wp.com\/latex.php?latex=f%28a%29%2Bif%28b%29&#038;bg=T&#038;fg=000000&#038;s=0' alt='f(a)+if(b)' title='f(a)+if(b)' class='latex' \/>. This error occurs more often than I find comfortable.\n<li> If <img src='https:\/\/s0.wp.com\/latex.php?latex=z&#038;bg=T&#038;fg=000000&#038;s=0' alt='z' title='z' class='latex' \/> is complex, then <img src='https:\/\/s0.wp.com\/latex.php?latex=z%5Cto+%5Cinfty+&#038;bg=T&#038;fg=000000&#038;s=0' alt='z\\to \\infty ' title='z\\to \\infty ' class='latex' \/> has not been defined. However, <img src='https:\/\/s0.wp.com\/latex.php?latex=%7Cz%7C%5Cto+%5Cinfty+&#038;bg=T&#038;fg=000000&#038;s=0' alt='|z|\\to \\infty ' title='|z|\\to \\infty ' class='latex' \/> is ok.\n<li> If <img src='https:\/\/s0.wp.com\/latex.php?latex=f%28x%2Biy%29%3Du%28x%2Cy%29%2Biv%28x%2Cy%29&#038;bg=T&#038;fg=000000&#038;s=0' alt='f(x+iy)=u(x,y)+iv(x,y)' title='f(x+iy)=u(x,y)+iv(x,y)' class='latex' \/>, then <img src='https:\/\/s0.wp.com\/latex.php?latex=v_x&#038;bg=T&#038;fg=000000&#038;s=0' alt='v_x' title='v_x' class='latex' \/> is <b>not<\/b> <img src='https:\/\/s0.wp.com\/latex.php?latex=%5Cdfrac%7B%5Cpartial+%7D%7B%5Cpartial+x%7D%5Cleft%28+iv+%5Cright%29+&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\dfrac{\\partial }{\\partial x}\\left( iv \\right) ' title='\\dfrac{\\partial }{\\partial x}\\left( iv \\right) ' class='latex' \/>.\n<li> The definition of contour integral does not include a modulus.\n<li> Cauchy&#8217;s Theorem requires that the path <img src='https:\/\/s0.wp.com\/latex.php?latex=%5Cgamma+&#038;bg=T&#038;fg=000000&#038;s=0' alt='\\gamma ' title='\\gamma ' class='latex' \/> is <em>closed<\/em>.\n<\/ul>\n<p><H2>Over to you<\/h2>\n<p>Do you have any examples of common mistakes in Complex Analysis that I have missed? Leave a comment below.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>My new book, Complex Analysis: An Introduction, is nearly finished. To help my students with revision I created a list of common mistakes and this forms a chapter in the book. As a lecturer with many years of experience of teaching the subject I have seen these mistakes appear again and again in examinations. I&#8217;m sure that, due to pressure, we&#8217;ve all written nonsense in an exam which under normal conditions we wouldn&#8217;t have. Nonetheless, many of these errors occur every year and I suspect something deeper is going on. What follows is not intended to be a criticism of my students, who, luckily for me, are generally hard-working and intelligent. Nor is it an attempt to mock or ridicule them. Instead the aim is to identify common mistakes so that they are not made in the future. And if this post seems negative in tone, the a later one is more positive as it delves into techniques that improve understanding. Imaginary numbers cannot be compared The first mistake is the probably the most common: the comparison of imaginary numbers. For example, students write for a complex number. This cannot be right. If were what does it mean for to be less than ? What is usually intended is the modulus of , i.e., . The point is, unlike real numbers, we cannot order the complex numbers. For example, which is bigger or ? This is difficult to decide! Since complex numbers can be identified with the plane ordering them is equivalent to ordering the points of the plane and clearly this can&#8217;t be done &#8212; at least not in any useful or meaningful way. One last point needs to be made. Although is incorrect, note that expressions like can be true if is a real number. Not realizing gives a circle This may not count as a mistake but is such a common gap in student exam knowledge that it needs to be mentioned: Too many students can&#8217;t sketch the image of and\/or can&#8217;t write down a contour whose image is the circle. Let&#8217;s reiterate the basics. The contour defined by defines part of a circle of radius . A full circle can be given by . Furthermore, the circle can be centred at just by adding . That is, with produces a circle of radius based at . By taking the modulus, we can show that really does give a circle: . Thus, the points on the contour all have the same length, i.e., are the same distance from the origin. And, a circle is just all the points the same distance from a specified point. Therefore, the image of gives a circle when . is not equal to Tempting as it may be to believe, is not equal to . These two expressions are related as we shall see. The correct equality is It is reasonable to know the derivation of this: What is the relation to ? It&#8217;s an inequality: This follows from the equality since is a strictly increasing function and , as we can see by drawing an Argand diagram. This last part is just Pythagoras&#8217; Theorem in action! Limits of the Standard Geometric Series Some students have trouble remembering whether the lower limit of the standard geometric series is or . Here is a situation in which taking a simple case provides the answer. We don&#8217;t need to look it up or provide a proof. Let , then we have and So the lower limit is . This exemplifies a useful technique: when unsure of recalling a result try a special case. Basic definitions It is possible to write a whole chapter on definitions and the problems that arise. (In fact, I did. See my book How to Think Like a Mathematician.) Central definitions in complex analysis include differentiation and contour integral. I regularly ask for the definition of complex differentiation and regularly most of the students fail to state it correctly. Quite often what I get is Alternatives include as or some garbled version of the above, for example with modulus signs, in the denominator and so on. So what is wrong with the expression in (**)? For a start there is no explanation of what , and are. It is important that is a complex function and that is identified as the point at which we are defining differentiability. Thus, we should say something like `The complex function is differentiable at if &#8230; &#8216;. Then we should bring in (**), making clear that we want this limit to exist, and to exist when rather than . Thus the definition should be something like `The complex function is differentiable at if exists&#8217;. Similar problems occur for the definition of contour integration. That is, what and are in is unexplained. This may seem pedantic. It is. Pedantry is very important in mathematics. Confusing definitions with calculation processes Do not confuse the definition of an object with a process by which we find that object. A good example of this mistake is confusing the definition of a pole with a process to find it. Poles and their multiplicities are clearly central to working with residues and so I regularly ask for the definitions in exams. In response to `Define what it means to be a pole at and define the order of a pole&#8217; I receive inaccurate (and often long and rambling) descriptions of how a pole is found in certain situations. For example, `The order of the pole is the power of the thing when the pole is zero&#8217; or `the order of the pole is the order of the bracket&#8217;. (These get no marks.) You can see in the former that the student does have some partial knowledge of pole order but that it is dependent on how pole order is calculated, i.e., we look for the zero (in the denominator) and find in most cases the power to which is taken. However, the question asked for the definition, so the precise definition should be given. As another example, consider the definition of a residue. Since the most useful method for calculating a residue is (ignoring conditions on and for the moment) I often receive this instead of a statement involving the coefficient of . Again, the student is seeing `residue&#8217; as something that is calculated and gives a calculation method rather than seeing `residue&#8217; as a concept. Misstating Theorems &#8211; Insufficient detail Following on from the previous example, if I had asked students to state the formula, then the above answer, would be insufficient. There is no explanation of what and are and what conditions are placed on them. This is a common problem. When I ask students in my geometry class or during talks I give in schools what Pythagoras&#8217; Theorem is, I receive a prompt reply: . I usually, to the initial confusion of the students, say no. There are two points, one is that , and are not defined. The second is deeper. The equation is the conclusion of the theorem. The assumptions are missing. The most crucial of which of course is that we need a right-angled triangle. Students certainly know this detail but ignore its importance. Hence, for the above residue method we need to say `We have for , analytic with , , &#8216;. The most common problem in misstating theorems is to just state the conclusion, particularly if the conclusion is a formula. Hopefully, now you can see that Cauchy&#8217;s Integral Formula is not just Order of Poles Another error with poles is to believe that the order of a pole is the order of the zero in the denominator of a rational function. That this is erroneous we can see with the function which has a zero of order 3 at 0 in the denominator but the order of the pole there is 2. In non-rigorous terms &#8212; and this really is non-rigorous &#8212; the numerator has a zero of order 1 and it `cancels&#8217; with one of the zeros in the denominator. We can&#8217;t even say that the order of the pole is at most the order of the zero in the denominator. For example, we can calculate that has a pole of order 3 at 0, not a pole of order 2. In this case the non-rigorous explanation is that has a pole of order 1 at 0 so combines with the pole of order 2 for to give a pole of order 3. This partly arises from the non-uniqueness of the representation of a function as a quotient. Here is and so can be written as . The latter representation has a zero of order 3 in the denominator (since has a zero of order 1 at 0) and is non-zero in the numerator, hence we have a pole of order 3. The point, perhaps, is to not be fooled by the way a function is written as a quotient. Integrals Clearly, an integral of the form , where is a real function, must produce a real number. The methods in the book allow us to calculate such integrals with complex analysis and there is the danger that a minor miscalculation will produce an imaginary number. Hence, any working which produces an imaginary number is wrong and should be corrected. The radius of convergence is real The radius of convergence is real and never has an imaginary part. The ratio test is one of the best tests we have for convergence of series and it can be used to calculate the radius of convergence of power series. In most elementary analysis course where real series are studied it is common for the ratio test to be stated with . This leads to some students misapplying it in the complex case. Consider the series and let . Then, So far, so good. For this example, the common mistake is to write something like, `we require that and so the radius of convergence is &#8216;. (My guess is that students are slavishly following the procedure in the real case.) This cannot be right. What does a circle of radius look like? We need the radius to be real. To prevent this error we could define or, what amounts to the same thing, just write Thus we require , i.e., . In other words the radius of convergence is . We cannot always replace with I often see substituted for (and a similar substitution for ) However, these are not equal. The confusion here comes from dealing with integrals of the form where is legitimately substituted for . The important differences are (i) is used, and (ii) it can only be used because . Argument problems The argument of a complex number causes a number of problems. First, for the argument of with we have the equation . This means many students calculate with (sometimes also written, somewhat erroneously, as ). We can see that this can lead to errors: but .Further details can be found in the book. The important point is to take care with the cases and . Plotting on an Argand diagram often helps. A second mistake is in the use of polar notation: If , then and for some . The mistake is to forget the extra (and sometimes students take rather than ). This leads to another common error as the previous remark has an important consequence for solving . We have , for . Too often the term is forgotten. Odds and ends The modulus of a number is never complex. (This usually occurs due to erroneously taking ! This is a very, very common mistake. It leads to which can in turn lead to an imaginary number. (An example is given in the book.) is not equal to . This error occurs more often than I find comfortable. If is complex, then has not been defined. However, is ok. If , then is not . The definition of contour integral does not include a modulus. Cauchy&#8217;s Theorem requires that the path is closed. Over to you Do you have any examples of common mistakes in Complex Analysis that I have missed? Leave a comment below.<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[254,11],"tags":[69,311,310],"class_list":["post-4053","post","type-post","status-publish","format-standard","hentry","category-complex-analysis-2","category-study-techniques","tag-complex-analysis","tag-complex-analysis-revision","tag-mistakes-in-complex-analysis"],"_links":{"self":[{"href":"https:\/\/www.kevinhouston.net\/blog\/wp-json\/wp\/v2\/posts\/4053"}],"collection":[{"href":"https:\/\/www.kevinhouston.net\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.kevinhouston.net\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.kevinhouston.net\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.kevinhouston.net\/blog\/wp-json\/wp\/v2\/comments?post=4053"}],"version-history":[{"count":74,"href":"https:\/\/www.kevinhouston.net\/blog\/wp-json\/wp\/v2\/posts\/4053\/revisions"}],"predecessor-version":[{"id":4127,"href":"https:\/\/www.kevinhouston.net\/blog\/wp-json\/wp\/v2\/posts\/4053\/revisions\/4127"}],"wp:attachment":[{"href":"https:\/\/www.kevinhouston.net\/blog\/wp-json\/wp\/v2\/media?parent=4053"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.kevinhouston.net\/blog\/wp-json\/wp\/v2\/categories?post=4053"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.kevinhouston.net\/blog\/wp-json\/wp\/v2\/tags?post=4053"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}